Orologico Forum 3.0

Visualizza post

Questa sezione ti permette di visualizzare tutti i post inviati da questo utente. N.B: puoi vedere solo i post relativi alle aree dove hai l'accesso.


Topics - Bertroo

Pagine: 1 2 [3] 4 5 ... 24
31
Orologi e Co... / Ophion watches
« il: Giugno 27, 2020, 23:12:58 pm »
A teardrop case made by Voutilainen, superb dials and great movement decoration... for the price of a mainstream watch.

Accessible” and “High-End” are not words that usually go well together… Quality usually comes at a price. A case made by a master watchmaker, a guilloché dial and a hand-decorated movement are often signs of a 5-digit price tag. Enjoying the taste of independent watchmaking, the exclusivity and the craftsmanship require deep pockets. A sad reality. But not for Ophion, a young brand created in 2015 and that, from the very beginning, caught our attention. In 2018, it did it again, with its second watch. And this year, Ophion introduced a watch that pushed the concept of “accessible high-end” much further. This is the Ophion OPH 786 Velos and today we take a closer look at it, in the metal.

Before we start with the review of this watch, let’s play a little game… What if asked you to put a price on a watch done in a small series, with a case made by Voutilainen’s case-making company, with independently welded teardrop lugs, featuring a guilloché dial, applied (and on some versions thermally blued) Breguet markers, a 3-dimensional dial layout with several layers and a movement hand-finished with a hammered surface. I can’t figure out the number that will be in your mind with precision, but I’m easily guessing you are not picturing an affordable price tag. Well, today, we’re going to demonstrate that these features don’t necessarily cost more than a mainstream, industrially produced watch.

BACKGROUND
Ophion was born in Spain, a country that we don’t usually associate with watchmaking. Fair enough, the watches aren’t produced there (parts are done in Switzerland and Germany) but this is where the founder, Miguel Morales Ribas, comes from. Driven by his passion for watchmaking, he decided to create his own brand with affordability and quality in mind adding some features of traditional high-end watchmaking in the equation… which could have driven the price up, but it didn’t.
Passionate about watchmakers such as Journe, Ferrier or Voutilainen, the idea was to find ways to capture their spirit but not the price. This meant finding solutions to cut prices, without neglecting the overall feeling of exclusivity. The two first chapters in the Ophion story, the OPH 960 and the OPH 786, were already convincing, but the newest model, the Velos, pushes the concept in a new (and impressive) direction. Because this time, not only did he take inspiration from these master watchmakers, he even managed to involve one of them in his latest project.
THE OPHION OPH 786 VELOS
This new model is an evolution of the 2018, not “Velos” back then, watch produced by Ophion. Most of the features are shared but the new Velos has fine-tuned every single aspect of the watch to bring even more horological pleasure: redesigned case; evolution of the dial and its layout; new handset and markers; refined patterns and execution; even more attention to the decoration of the movement; and a slight but justified price adjustment.
A HANDSOME, BEAUTIFULLY EXECUTED CASE
Starting with the case, you’ll probably see a certain resemblance with watches made by Kari Voutilainen (or Urban Jurgensen). The round profile of the central container, the convex bezel and mostly the teardrop lugs are familiar elements that are not just a tribute to Kari’s work… It is the work of his own case-making company. For this new model, Ophion has partnered with Voutilainen & Cattin SA, a company partially owned by Kari and specialized in case-making, which produces and finishes cases for multiple watch brands, now including Ophion.

Typical in Kari’s design language, the case of the Ophion OPH 786 Velos relies on a central container that is pebble-shaped with no sharp angles and entirely polished surfaces. This smooth shape is also echoed in the crown, which has a flat onion profile and is finely notched. The case measures a reasonable 39mm diameter, nice proportions for a modern dress watch, which will fit most wrists. The overall execution of the case is, as you would expect from Voutilainen & Cattin, very neat and precise, with a beautiful polishing.

The lugs are the main attraction on this case, those teardrop lugs that will immediately talk to high-end watchmaking enthusiasts. Again, these are typical to Kari’s work – and also Urban Jurgensen, since Voutilainen used to work for this brand, and later did prototyping and unique pieces for them. Executed in polished steel like the rest of the case, the lugs are independent modules, forged and welded to the case by hand. No doubt about the beauty of the execution, or the visual beauty of these teardrop lugs, which give the Ophion OPH 786 Velos far more charm than the previous models that used more standard cases. The perceived quality makes a huge jump, which propels this watch into a different category… and visually, it is simply a feast for the eyes.

The rest of the case is neatly executed and well proportioned. The watch sits nicely on the wrist, as the lugs are sloped and the strap sits low on the case. About this, Ophion made a rather conservative choice here, with alligator straps (cowhide leather with a pattern as standard or genuine alligator as an option). If the quality of the strap isn’t to be debated, I would personally go for something a bit more casual, less strict and without a pattern. A simple, well-executed matte and flat calf leather would be more appropriate in my opinion. But that’s a highly subjective remark.
TEXTURED DIALS, FULL OF DETAILS
Just like the previous model, this new Ophion OPH 786 Velos has a lot going for its dial, with layers, applied tracks and markers, patterns, multiple finishings… The dial itself and all its elements are clearly far beyond what you’d expect to see in a sub-3k watch. Also, like its predecessor, two different dial patterns are available. Not photographed here, but presented in our introducing article, is a brushed galvanic dial, with a circular pattern. For this review, we’ve decided to focus on the guilloché dial, available in three colours; silver, blue or salmon, with thermally blued or rhodium-plated applied elements.
Guilloché is a traditional technique that is, in high-end watchmaking, executed by a hand-controlled machine known as an engine-turning lathe. The process, which starts with a gold or silver dial plate, creates repetitive motifs by chiselling the metal. It is a complex, time-consuming process that requires highly skilled craftsmen but that results in superb dials with the unique charm of a handmade object. This is the technique used by Breguet or Kari Voutilainen (him again) in his dial-making company Comblemine. In order to cut costs, most mainstream companies use a different, much cheaper technique to obtain such patterns; by stamping the dials in an industrial way. The result is far less precise and detailed, without the sharp chiselling effect of hand-guillochage.
What Ophion is doing is an intermediate solution that creates this deep, sharp texture without the costs of a hand-executed engine-turning process. The dials of the OPH 786 Velos are obtained by using a CNC machine. This way, the dial is still properly engraved (machine-chiselled), meaning that material is removed, creating deep incisions and the brightness and reflections resulting from these patterns, without the need of using a costly technique. For its watch, Ophion chose a cross weave (also named panier pattern), a traditional motif which is finely executed here.
And this is just the beginning. On top of this patterned dial plate are multiple applied elements. New to this model are the “Breguet” numerals, with a deep profile and precise execution. As Miguel points out, the watches you see here are still prototypes and the final products will have even more detailed numerals. These are available either in silver colour (rhodium-plated, on the blue model) or thermally blued (on the silver and salmon dials). They are colour-matched with the hands, which not only are very precisely executed but also feature a new design – the new hour hand gives its name to the watch, Vélos, which comes from the classical Greek meaning ‘arrow’.
In addition to that, Ophion relies on its usual 3D dials, with multiple applied elements, such as the raised tracks – one for the minutes, on the periphery, and one to mark the centre of the dial, which combines a diamond-polished bevel and a circular brushed top surface, and that features a cartouche with the name of the brand.
Ophion OPH 786 Velos
Three colours are available with this patterned dial, all obtained by galvanic treatment, resulting in metallic colours and reflections. Each version has its own personality, with a personal preference for the salmon model… Yes, the classic steel/salmon/blue indexes combination is always a winner. Altogether, the level of detail on this dial is simply stunning, in this price range at least. Certainly, you’ll find more refinement at Breguet, more handmade parts at UJ… but in the 2K-4K Euros range, there are not many watches that can compete with this OPH 786 Velos. Period!
MOVEMENT
Now that we have covered the habillage parts, you might think that, in order to control the costs, this watch is equipped with a standard automatic Sellita or ETA movement. Once again, you’d be wrong. Yes, for obvious reasons, the movements are outsourced, yes, the movements start their lives as industrially produced ébauches and yes, the architecture is used by others. But many parts are exclusive to the brand and the finishing is not your classic machine-made Geneva stripe.
The base movement used by Ophion OPH 786 Velos is the same as the two previous watches of the brand, a hand-wound, 4Hz frequency and 5-day power reserve engine (twin-barrel) once produced by Technotime, now manufactured by Soprod. There’s already quite a lot to love here, with this long autonomy manually wound movement, with a large diameter that nicely fits the case. However, the interest is not only here.
Ophion OPH 786 Velos
 Ophion OPH 786 Velos Ophion OPH 786 Velos
What’s special in this movement is what other brands don’t use; proprietary, internally designed bridges with a symmetrical layout and a finger-style display. This layout is reminiscent of antique pocket watches of the English school of watchmaking or some Breguet models (mostly the souscription watches). In the same vein, the cock (the bridge that secures the balance wheel) has this typical British-inspired design, with an opened centre area and a stepped architecture.
Ophion OPH 786 Velos
When it comes to the decoration, Ophion went for bold and refined techniques. The 3 main bridges feature a unique pattern that resembles the antique hammered technique – of course, executed here in a more modern way. The edges and the screw slots are bevelled and polished, nicely contrasting with the matte upper surfaces. The flanks of the bridges have a straight graining too. Finally, the cock combines polished bevels, straight-brushed top surface and grained flanks, with an oversized polished screw.
Once again, this movement is another part that really amazes us for a watch in this price range. Large, coherent with the style of the watch, beautifully finished and exclusive, it will please those who are looking for more than just a standard automatic ETA base.
THOUGHTS
You’ve probably understood that we are truly impressed by Ophion’s latest offering. Whatever you look at, there’s incredible attention to detail, rarely seen in watches in the 2k-4k Euros category. What’s even more impressive is that this watch is enitrely produced in Europe – as proudly engraved on the caseback; 70% Swiss – 30% German.
Ophion OPH 786 Velos
 Ophion OPH 786 Velos Ophion OPH 786 Velos
Quality apart, the Ophion OPH 786 Velos marks a positive evolution in terms of design, with more coherence between the dial, the (superb) case by Voutilainen & Cattin, the numerals and hands, and finally the movement. This watch is well proportioned, full of charm and references to high-end watchmaking, elegant yet with a twist and, good point, its own personality.
Ophion OPH 786 Velos
Ophion OPH 786 Velos
Is it perfect? Almost, as I’d personally changed the strap for something less conservative and would like the anti-reflective coating on the sapphire crystal to be a bit more efficient – especially visible on the blue model… But honestly, these are minor flaws that won’t change my very positive opinion about this watch, which cost about the same as an industrial “luxury” watch from a mainstream brand. High-end watchmaking made accessible.
PRICE AND AVAILABILITY
The Ophion OPH 786 Velos can be ordered from the brand’s website here. It is priced at EUR 2,580 (excl. taxes) for the radial dials and EUR 2,870 (excl. taxes) for the guilloché dials.
More details at www.ophion-watches.com.
TECHNICAL SPECIFICATIONS – OPHION OPH 786 VELOS
Case: 39mm diameter x 10.45mm height - stainless steel case, polished - independently made and welded teardrop lugs (case by Voutilainen & Cattin SA) - domed sapphire crystal front, anti-reflective coating - sapphire caseback - lug width 20mm - 50m water-resistant
Dial: multilayered dials CNC guilloché in three galvanic colours - blue, silver and salmon - applied Arabic numerals thermal blued or rhodium-plated
Thermal blued or nickel-plated hands (new hour hand named Vélos, which comes from the classical Greek meaning arrow)
Also available with radial brushed base in two galvanic colours - blue or anthracite
Movement: proprietary movement made by Soprod - hand-wound - 5-day power reserve with double barrel - 28,800 vibrations/hour - 26 jewels - handmade hammered decoration - hours, minutes, seconds
Strap: handmade leather strap with pin buckle included in the base price - alligator leather as an option - steel pin buckle
Price: EUR 2,580 (excl. taxes) for the radial dials
EUR 2,870 (excl. taxes) for the guilloché dials

monochrome-watches.com

32
Orologi e Co... / La fine di Baselworld
« il: Aprile 14, 2020, 18:51:44 pm »
Probabilmente oggi si è sancita la fine di baselworld nel settore orologeria.
Con un comunicato uscito nel pomeriggio si è confermato che Rolex, Tudor, Patek Philippe, Chopard e Chanel non parteciperanno più alla fiera e sembra proporranno qualcosa di alternativo nel 2021.
Baselworld è stata una bella mangiatoia per tanti negli anni passati...ora “è fernut a zezznell”.
Già il gruppo Swatch Group si era ritirato dalla fiera creando un danno enorme.

33
Orologi e Co... / Gli orologi del Califfo
« il: Marzo 31, 2020, 13:35:29 pm »
7 anni fa ci lasciava Franco Califano.
Tranne qualche canzone l’ho apprezzato più come scrittore e compositore per altri che per se stesso.
Meravigliosa “Minuetto” scritta per Mia Martini.

Girando per la rete ho trovato un po’ di foto sue con al polso i suoi orologi.
Se ne riconoscono 3: un hublot Classic, un submariner oro giallo e un daytona oro giallo. Il 4 non lo riconoscono e qui chiedi ai più...esperti, non anziani  :P, se dal bracciale riescono a capire di cosa si tratti.
In altre foto indossa anche degli ultra piatti in oro ma siccome non si riesce a capirne il modello ho preferito non inserirli.

34
Orologi e Co... / Un po’ di gossip
« il: Febbraio 12, 2020, 00:07:40 am »
Qualcuno non ricordo dove ha chiesto se a San Remo è stato avvistato qualcosa.
A San Remo non so...questi sono alcuni invece della notte degli Oscar

https://www.gqitalia.it/moda/article/rolex-orologio-spike-lee-oscar



35
Orologi e Co... / Tempus srl a Padova lo conoscete?
« il: Novembre 28, 2019, 20:11:07 pm »
Qualcuno lo conosce? Sapete se gli annunci sono veritieri e se è affidabile?

36
Orologi e Co... / Un sogno realizzato
« il: Agosto 06, 2019, 09:46:35 am »
Come detto tempo fa ho sognato di comprarmi un Urwerk UR-103...beh il sogno si è realizzato  :D
Preso qualche giorno fa in condizioni di “praticamente nuovo”.
Orologio PZZESCO! Intanto è un vero oro rosa, da qualsiasi punto lo si guardi e sotto qualsiasi luce si vede che è rosa. Ha una cassa scanalata di difficile lavorazione, molto ergonomica, è leggermente curvata ed è anche sagomata. Lo stesso dicasi per lo zaffiro anch’esso sagomato e curvato e difficile da fare.
I dischi ora hanno una finitura sabbiata molto bella e i bracci che girano collegati ai dischi ora sono in titanio.
Molto bello anche il back dove nulla è lasciato al caso, come si può vedere dalla finitura lucida all’interno dei contatori.
Orologio che non lascia indifferenti sia se piace sia no. Ha una portabilità incredibile e si adatta ad ogni occasione (certo con lo smoking non lo metterei). Ma credo si possa tranquillamente considerare un everyday watch a tutti gli effetti.
Il cinturino è morbidissimo e realizzato con una bellissima pelle. La fibbia, anche questa in oro rosa, si sagoma ai lati e riprende la forma della cassa.
L’orologio è completo della sua enorme e bellissima scatola e controscatola e della granzia, per cui anche bello completo.
Di notte sembra una centrale nucleare...si vede benissimo tutto!
Lo considero un pezzo da 90 dell’alta orologeria moderna e in generale dell’alta orologeria per la sua importanza storica e unicità.
È l’icona di casa Urwerk...tanto da far innamorare anche la concorrenza stessa della maison :D

37
Orologi e Co... / Un sogno strano
« il: Giugno 29, 2019, 16:14:57 pm »
Si dice che la notte porta consiglio...stanotte ho sognate di essere da un reseller e cambiare il mio daytona con l’Urwerk 103.
Fermo restando che il 103 mi piace da matti, così come quasi tutti gli Urwerk, è da questa mattina che ho questo tarlo...

38
Orologi e Co... / Phenomen Watch novità nel panorama orologero
« il: Aprile 27, 2019, 18:22:12 pm »
Parto prevenuto. Già so i commenti sull’estetica e le storielle sull’indossabilita’ e già so che questo post durerà poco perché desterà poco interesse.
Però questa è una delle cose che ha maggiormente catturato la mia attenzione a Baselworld 2019.
Io sono un amante di questo tipo di orologeria. In generale adoro l’orologeria sportiva e l’orologeria sportiva estrema.
Iniziamo dal brand. Sono francesi e si chiama Phenomen. Ho detto sono perché la casa nasce dall’idea di due orologiai, uno dei quali lavorava per Greubel&Forsay. La manifattura (perché di tale si tratta) alloggia tutta in Francia e si avvale delle migliori tecniche moderne sia per la progettazione che per la realizzazione.
Il calibro di Axiom (nome del modello prodotto) e’ interamente progettato e realizzato all’interno della manifattura.
E’ un calibro molto particolare anzitutto per la forma ma anche per le sue peculiarità tecniche. E’ dotato di due bariletti, scappamento indipendente sulla parte superiore del calibro e doppia corona, una per la carica dell’orologio è una per la regolazione di ore e minuti.
L’orologio e’ un salterello retrogrado sia per i minuti che per le ore e riprende quelli che sono i contagiri delle auto da corsa. L’orolgio infatti ha un DNA corsaiolo ed è concepito in maniera tale che anche al polso durante la guida, l’ora sia facilmente leggibile.
Un’altra caratteristiche che ne denota la sportività e’ l’uso esclusivamente del titanio per la cassa. Non vi è una parte che sia in acciaio e può essere personalizzato su richiesta.
Personalmente come detto è un orologio che mi ha colpito e la prova al polso e’ stata ottima. Orologio leggerissimo (anche la deplo e’ in titanio) e secondo me molto portabile. Ovviamente non è un dress watch per cui sia smanicato ma anche in abbigliamento comodo lo trovo indossabile grazie anche al fatto che la cassa hanuna sinuosità che dalle foto non traspare.
Di seguito qualche foto durante la prova.
Quello nero e’ un esemplare richiesto da uno specifico cliente e anche quello è in titanio.

39
Orologi e Co... / Franc Müller Vegas
« il: Dicembre 12, 2018, 22:27:26 pm »
In questi giorni ho provato il Frank Müller Vegas.
Davvero un bel FM! Vestibilita’ fantastica come tutte le casse 58xx e 68xx.
Devo dire che un po’ mi sorprende il fatto che siano stati così sottovalutati e addirittura fallita la casa spostando la produzione nell’est Europa per un periodo.
Probabilmente i listini enormi hanno portato al disinteresse. Ma i primi FM erano, a parer mio, bellissimi. Casse splendide, quadranti con lavorazioni d’alta orologeria e spesso complicazioni molto “carine”, come quella del Vegas appunto.
Gli ultimi prodotti sono meno pregiati secondo me e non all’altezza delle prime produzioni, che in alcuni casi hanno anche montato ebauche di pregio e prestigio.
Prima o poi per quel che mi riguarda un FM con cassa 58xx o 68xx arriverà. Sono davvero ben fatti.


40
Orologi e Co... / Tourbillon celati
« il: Dicembre 11, 2018, 11:34:38 am »
Prendendo spunto da un post di Idomeneo scritto nella discussione aperta da Federico, vi chiedo quali sono i tourbillon “celati” che vi vengono in mente?

A me questi:


41
Orologi e Co... / Royal Oak tourbillon extra thin raggiera
« il: Dicembre 10, 2018, 19:26:53 pm »
Lo trovo un orologio fantastico!
Sono riusciti a migliorare un orologio già bello.
Fantastico il motivo a tapisserie a raggiera. Belle anche le cromie.
Spessore di 8.85mm

42
Orologi e Co... / Brand italiano Eluxio Watches
« il: Ottobre 28, 2018, 22:29:16 pm »
Girando su FB, grazie anche al nostro amico Michele (Palombaro), mi sono imbattuto in questo brand.
Mi ha subito colpito per due motivi: 1) esteticamente sono molto gradevoli, 2) Associato al brand ho visto un nome italiano. Cosa non da poco visto il settore.

Il patron del brand e costruttore degli orologi e’ Osvaldo Marzo un italiano, a quanto ho capito, che abita in Germania.
Ragazzo appassionato di orologeria meccanica e linee vintage, tanto che infatti le sue creazioni si ispirano alle linee anni ‘70.
La sua è un Produzione artigianale e ho letto sul sito, non utilizza macchine a CNC.
Gli orologi vengono prodotti solo su ordinazione e dalle foto su FB, sono personalizzabili in svariati modi. Dai quadranti alle lancette, fino alle finiture.
Questi i componenti dell’orologio che vengono prodotti in house:
cassa
corona
quadranti
indici
lancette
ring movement block
fibbia e ardiglione

Come calibri dovrebbe utilizzare Sellita.
Le finiture dei quadranti sono numerose. Soleil, sabbiato, lucido o quadrante su più livelli e altre.
Si possono avere automatici e manuali, con o senza secondi al 6, con o senza datario e non dovrebbero mai superare gli 8mm di spessore.

A me non dispiacciono affatto!















43
Orologi e Co... / Swatch Group lascia Baselworld 2019
« il: Luglio 29, 2018, 16:46:28 pm »
https://estacaochronographica.blogspot.com/2018/07/swatch-group-abandona-baselworld-sem.html?m=1


Credo sia una notizuola interessante.
Strana come scelta, visto che comunque le esportazioni stanno crescendo.

44
Orologi e Co... / Collaborazione Vaucher Fleurier e Gorillawatches
« il: Luglio 14, 2018, 17:18:07 pm »
Ora al di là del nome che...evvabbe’!
Ma la mia prima impressione è stata “macheccazzzz!!!”   :o



45
Orologi e Co... / Stephan Sarpaneva
« il: Maggio 23, 2018, 15:33:38 pm »
Forse un genialoide come design...sicuramente unico e particolare. I suoi orologi sono caratterizzati da un forte impatto estetico, o piacciono o no! Non ci sono vie di mezzo ma sicuramente non lascia indifferenti.

Personalmente li trovo davvero belli. Lefiniture di cassa è quadrante sono di primo livello!

Forse un qualcosa di esteticamente innovativo ma rimane comunque in una sfera di classicità.
Fantastiche le fasi luna!



Pagine: 1 2 [3] 4 5 ... 24