Orologico Forum 3.0

HWM - New Models

Dani80

  • *****
  • 2977
    • Mostra profilo
    • E-mail
HWM - New Models
« il: Gennaio 18, 2011, 13:57:49 pm »
Da www.worldtempus.com

HWM - Magnus watch



Its precision balance, the special mechanisms for fine regulation of the escapement, the balance cock and even the balance wheel are completely unique. This design is available in two variants — while the dial of the Magnus Contemporaine shows a perfectly executed interplay of space and volume, the Magnus Classic reflects the business-like finesse of the watch.

Main characterisctics

Type: 3-hand watch
Hands: Hours/minutes/small seconds (at 6 o'clock)

Technical features

- Independant manufacture Calibre: Cal. 800
- 3 patents pending
- Fully hardened parts
- 100% Swiss Made

Casing

Design: Eric Giroud
Casing variants:
- Polished/satinised steel
- White gold or red gold (Classic only)
Waterproof to: 50 m
Length over strap-holding bridges: 53.10 mm
Casing diameter: 42.50 mm
Casing height, total: 13.05 mm
Casing height, without crystal: 10.30 mm
Crystal: Domed sapphire glass
Casing back crystal: Flat sapphire glass

Dial

Design: Eric Giroud
Shock resistance: Dial positioned by means of pins, screwed directly onto the movement
Dial variants: Magnus Classic
- Brass/tracery: blue (steel casing)
- Gold, with gold applications/tracery: anthracite (gold casing)
Magnus Contemporaine
-Brass, with brass applications
Hands: Hardened steel
Bracelet: Leather/alligator, with pin buckle
Bracelet size: Strap-holding bridges: 22 mm/buckle: 20 mm

Movement

Calibre n°: HWM Cal. 800
Diameter: 38.30 mm
Height: 6.10 mm
Jewels: 33
Escapement type: Swiss lever escapement; capillary phase to improve oil retention
Balance: Mass-regulated Vivax balance/16 mm/patent pending
Balance spring: Over-coil hairspring (Breguet)
Fine regulation: Tenere fine adjustment/patent pending
Semi-oscillations: 18 000/h
Mainspring barrel diameter: 17.40 mm
Moment of inertia: 126 mgmm²

Gear train


Gear tooth system: Cycloid gear teeth
Pinions: Fully hardened steel pinions
Gears: Copper beryllium
Mainspring barrel: Copper beryllium
Screws: Steel, blued and polished
Power reserve: 50h

Decoration

Movement plates: Diamante bevelled




HWM - Tensus watch



With more than 300 individual parts, winding reserve indicator, a precision balance, special twin mainspring barrels and a triple escape mechanism with dual escape wheel and constant power, it is a true masterpiece of the art of horology. The Tensus is the perfect watch for everyone who is not only captivated by the intricate mechanisms; it is also, with its exquisite embellishments, an exclusive understatement.

Main characteristics

Type: 4-hand watch (including power reserve)
Hands: Hours / minutes / small seconds (at 6 o’clock), power reserve (at 9 o’clock)

Technical features

- Independent manufacture Calibre: Cal. 880
- 5 patents pending
- Fully hardened parts
- 100 % Swiss Made

Casing

Design: Eric Giroud
Casing variants:
- Polished/satinised steel
- White gold or red gold
Waterproof to: 50 m
Length over strap-holding bridges: 53.10 mm
Casing diameter: 42.50 mm
Casing height, total: 13.95 mm
Casing height, without crystal: 11.20 mm
Crystal: Domed sapphire glass
Casing back crystal: Flat sapphire glass

Dial

Design: Eric Giroud
Shock resistance: Dial positioned by means of pins, screwed directly onto the movement
Dial variants:
- Brass, with brass applications / tracery: blue (steel casing)
- Gold, with gold applications / tracery: anthracite (gold casing)
Hands: Hardened steel
Bracelet: Leather / alligator, with pin buckle
Bracelet size: Strap-holding bridge: 22 mm / buckle: 20 mm

Movement

Calibre n°: HWM Cal. 880
Diameter: 38.30 mm
Height: 7.00 mm
Jewels: 55
Escapement type: Sequax triple anchor escapement with double escape wheel and constant power / patent pending; capillary phase to improve oil retention
Balance: Mass-regulated Vivax balance / 16 mm / patent pending
Balance spring: Over-coil hairspring (Breguet)
Fine regulation: Tenere fine adjustment / patent pending
Mainspring barrel: Pariter twin mainspring barrel / patent pending
Semi-oscillations: 18 000/h
Mainspring barrel diameter: 17.40 mm
Moment of inertia: 126 mgmm²

Gear train

Gear tooth system: Cycloid gear teeth
Pinions: Fully hardened steel pinions
Gears: Copper beryllium
Mainspring barrel: Copper beryllium
Screws: Steel, blued and polished
Power reserve: 60 h

Decoration

Movement plates
: Hand bevelled
Cold silence has a tendency to atrophy any sense of compassion! (J.Maynard Keenan - Tool)

Airangel

  • *****
  • 48907
  • Spambuster
    • Mostra profilo
Re:HWM - New Models
« Risposta #1 il: Gennaio 18, 2011, 14:08:53 pm »
tra i più brutti che abbia mai visto.....

Dani80

  • *****
  • 2977
    • Mostra profilo
    • E-mail
Re:HWM - New Models
« Risposta #2 il: Gennaio 18, 2011, 14:22:36 pm »
Mi lasciano indifferente...

Cold silence has a tendency to atrophy any sense of compassion! (J.Maynard Keenan - Tool)

Teo

  • *****
  • 7909
    • Mostra profilo
    • E-mail
Re:HWM - New Models
« Risposta #3 il: Gennaio 18, 2011, 17:09:55 pm »
Mi lasciano indifferente...


quoto!!!

Bertroo

  • *****
  • 33982
    • Mostra profilo
Re:HWM - New Models
« Risposta #4 il: Gennaio 18, 2011, 20:00:05 pm »
Dichiarano calibro di manifattura.... ???   Fatto da...??? O da che base???? ;D ;D ;D  Servirebbe qualche foto del movimento...e comunque non mi piacciono...