Orologico Forum 3.0

VDB-Vintage II Base PVD

Airangel

  • *****
  • 48907
  • Spambuster
    • Mostra profilo
VDB-Vintage II Base PVD
« il: Settembre 10, 2010, 14:15:26 pm »
II Base PVD

Spezifikation:

Case, bezel, caseback, and crown: Stainless Steel 316L

Size: 46 mm x 58 mm x 19 mm ( incl. domed plexi)
bezel: 12 ends, single turnable 5 min clicks, Lumed center-marker, unbreakable, stainless mechanic
Plexi: 8mm whole size, viewable 4 mm domed
Crown: 11mm, 12ends, screw-down, spring-loaded, double sealed, Logo engraved
Caseback: screwdown, double-sealed, engraved
Case: polished, glass-pearl-blasted or PVD-coated antrazith, Referenznumber and Serial engraved between the lugs
Dial: Brass or Stainless Steel , coated, painted, engraved, lumed with some Radiumparts
Hands: Vintage,lumed with some Radiumparts
Movement: Vintage Universal Geneve Polyroter (Base),Vintage Rolex cal. 1030 (SE)
Strap: 28mm Shark in black and brown( Base), Alligator by Ritter (SE)
Buckle: Stainless Steel screwin

water-resistant 200m
Waterindicator at 6
Antimagnetic shield for the movement
15 Base und 3 SE will be build
Left hand version possible if customer choice it
special personal engraving possible
Serialnumber engraved 100115 - 101515 II (Base) 10SE 01-03 II (SE)
delivered with two Sharkstraps,
the Special Edition (SE) gets a gator too
Stored in a Vintage wooden box (mahogany /cambala) with papers











Re:VDB-Vintage II Base PVD
« Risposta #1 il: Settembre 10, 2010, 14:40:11 pm »
Che è??!! L'orologio della foresta?!!
Meglio fare et pentirsi, che non fare et pentirsi.

joebar

Re:VDB-Vintage II Base PVD
« Risposta #2 il: Settembre 10, 2010, 14:41:14 pm »
Molto bello ;)
 
 
 
 
 
 
 
 
 
 
..il movimento :D  il resto non so definirlo :o

merke

  • *****
  • 4537
  • Forza e Onore il resto è Aria e Polvere!
    • Mostra profilo
    • [IMG]http://img14.imageshack.us/img14/9286/zzzlv.jpg[/IMG]
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #3 il: Settembre 10, 2010, 14:44:02 pm »
quoto sul movimento...........l'orologio è brutto da morire :-X ........poi il cinturino ingiudicabile :o :o :o :o

Airangel

  • *****
  • 48907
  • Spambuster
    • Mostra profilo
Re:VDB-Vintage II Base PVD
« Risposta #4 il: Settembre 10, 2010, 14:50:16 pm »
microrotore slurp..... ;)

Patrizio

  • *****
  • 15852
  • Homo sapiens non urinat in ventum
    • MSN Messenger - patmonfa@hotmail.com
    • Mostra profilo
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #5 il: Settembre 10, 2010, 15:09:32 pm »
Movement: Vintage Universal Geneve Polyroter (Base),Vintage Rolex cal. 1030 (SE)

???????????????

qualcuno ne sa? io professo la mia ignuranza teribbile...
- Homo sapiens non urinat in ventum -


Patrizio

  • *****
  • 15852
  • Homo sapiens non urinat in ventum
    • MSN Messenger - patmonfa@hotmail.com
    • Mostra profilo
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #6 il: Settembre 10, 2010, 15:12:55 pm »
Movement: Vintage Universal Geneve Polyroter (Base),Vintage Rolex cal. 1030 (SE)

???????????????

qualcuno ne sa? io professo la mia ignuranza teribbile...

il 1030 rolezz non è un microrotore...lìuniversal si..ma che c'entra rolezz?
- Homo sapiens non urinat in ventum -


fabri5.5

  • *****
  • 12287
    • Mostra profilo
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #7 il: Settembre 10, 2010, 16:26:05 pm »
stavo già per chiudere,
poi ho visto cosa c'è dentro.... :P
peccato per il resto. :'( :'(

Dani80

  • *****
  • 2977
    • Mostra profilo
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #8 il: Settembre 10, 2010, 17:04:31 pm »
Sarà anche vintage, avrà anche il microrotore...ma a me non piace per niente!!!

Cold silence has a tendency to atrophy any sense of compassion! (J.Maynard Keenan - Tool)

Bertroo

  • *****
  • 33982
    • Mostra profilo
Re:VDB-Vintage II Base PVD
« Risposta #9 il: Settembre 10, 2010, 19:29:34 pm »
Sarà brllo dentro ma fuori fa schifo!!!! :'(

Re:VDB-Vintage II Base PVD
« Risposta #10 il: Settembre 10, 2010, 20:14:32 pm »
Io dico che non si può vedere... é tremendamente brutto!!!
 

Re:VDB-Vintage II Base PVD
« Risposta #11 il: Settembre 10, 2010, 20:54:23 pm »
Penso che per ospitare quel magnifico movimento, avrebbero potuto fare qualche sforzo in più; l'orologio è bruttissimo. Mi lascia anche perplesso la descrizione: ...Rolex cal. 1030..., cosa centra Rolex? A meno che a noi manchi qualche notizia essenziale sullo sviluppo e la nascita di quel calibro UG. Sarebbe anche interessante capire se si tratti di una giacenza di magazzino, riguardo ai movimenti, oppure se sono stati rimessi in produzione; quando, da chi e perchè. Mistero!  :D ;)   

Patrizio

  • *****
  • 15852
  • Homo sapiens non urinat in ventum
    • MSN Messenger - patmonfa@hotmail.com
    • Mostra profilo
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #12 il: Settembre 11, 2010, 08:13:25 am »
po metti un microrotore e un fondello spesso 5 mm come una pentola...mah
- Homo sapiens non urinat in ventum -


Airangel

  • *****
  • 48907
  • Spambuster
    • Mostra profilo
Re:VDB-Vintage II Base PVD
« Risposta #13 il: Settembre 11, 2010, 09:31:43 am »
è una linea così....questi fanno orologi con queste linee....

Teo

  • *****
  • 7909
    • Mostra profilo
    • E-mail
Re:VDB-Vintage II Base PVD
« Risposta #14 il: Settembre 11, 2010, 12:23:46 pm »
stavo già per chiudere,
poi ho visto cosa c'è dentro.... :P
peccato per il resto. :'( :'(


qui ci soddisfa solo il 50%  8) 8) 8)


Matteo